Every Length. Every Colour.
One Part Number System.
RiggerSafe® is built to be specified, not just sold — a defined part number for every length and colour, so the right tool is ordered the first time, every time.
Built to be Specified, Not Substituted
Every RiggerSafe® tool carries a defined part number — so procurement teams can order the exact length and colour a task requires, and so the correct tool stays correct across every reorder.
Colour code first, length second — every part number resolves to one exact specification, with no ambiguity between sites, regions, or reorders.
This matters more than it looks like it should.
Most push-pull tools on the market are bought as generic items — "a stick," reordered by description, substituted by whoever's nearest supplier has something similar in stock. That's how a site ends up with six slightly different tools doing the same job, none of them quite the length the task needed.
A defined part number closes that gap. It lets a procurement team specify RiggerSafe® into a purchase order, a vendor master, or a site standard — the same way they'd specify any other engineered component, not a commodity.
That's also why Hadeed Steel specifies RiggerSafe® by part number for procurement, not by description.
Three Colourways. Every Length
From 21″ to 96″. All Specified.
Bright Yellow — HSF-RS-Y
Maximum-visibility flagship colourway for open yards, steel fabrication shops, and offshore decks.
| Length | Part Number |
|---|---|
| 21″ | HSF-RS-Y-21 |
| 42″ | HSF-RS-Y-42 |
| 50″ | HSF-RS-Y-50 |
| 72″ (6 ft) | HSF-RS-Y-72 |
| 96″ (8 ft) | HSF-RS-Y-96 |
Industrial Blue — HSF-RS-B
High contrast against structural steel and bright deck environments for precision alignment work. The widest length range of the three colourways.
| Length | Part Number |
|---|---|
| 24″ (2 ft) | HSF-RS-B-24 |
| 36″ (3 ft) | HSF-RS-B-36 |
| 48″ (4 ft) | HSF-RS-B-48 |
| 60″ (5 ft) | HSF-RS-B-60 |
| 72″ (6 ft) | HSF-RS-B-72 |
| 96″ (8 ft) | HSF-RS-B-96 |
Neon Green — HSF-RS-NG
High-visibility signal colour suited to indoor plants, chemical facilities, and confined-space conditions.
| Length | Part Number |
|---|---|
| 21″ | HSF-RS-NG-21 |
| 42″ | HSF-RS-NG-42 |
| 50″ | HSF-RS-NG-50 |
| 72″ (6 ft) | HSF-RS-NG-72 |
| 96″ (8 ft) | HSF-RS-NG-96 |
Custom Lengths and Colours, Up to 8 Feet
The table above covers the standard catalogue — but every length up to 96″ (8 ft) and any colourway can be specified to match a site standard, a fleet requirement, or a task this range doesn't cover yet. Tell us the distance the job needs; we'll confirm the part number.
Specified by Hadeed Steel for procurement.
Length to Application
A fast lookup for selecting the right tool against the task at hand — cross-referenced against the doctrine on the homepage.
| Length | Best For | Typical Operations | Industries |
|---|---|---|---|
| 21″–24″ | Confined spaces, close control | Maintenance, bench-level handling, tight access work | Utilities, vessel/tank work, mechanical rooms |
| 36″–42″ | General rigging | Pipe handling, equipment positioning, routine lifting | Oil & gas, steel, construction |
| 48″–50″ | Structural & fabrication | Beam/plate positioning, prefabricated component handling | Construction, fabrication yards |
| 60″–72″ | Extended reach | Large suspended loads, crane-assisted movement | Offshore platforms, marine decks, heavy construction |
| 96″ (8 ft) | Maximum exclusion distance | Swinging loads, load landing, highest-risk lifts | Offshore heavy lift, bulk cargo, extreme-risk environments |
Specify the Right Part Number
Tell us the length, colour, and quantity — or the task and we'll confirm the part number for you.